# Watson Concrete Contractor for Equipment Pads and Outbuilding Slabs

> Equipment pads for generators and HVAC units, plus slabs for outbuildings in Watson and Live Oak. Set above standing water, with a written estimate.

Canonical page: https://hernandezconcreteworks.com/watson

Hernandez Concrete Works (Hernandez Concrete Works LLC) is a family-owned concrete contractor based in Baton Rouge, LA 70817, owned by Gerardo Hernandez. Baton Rouge's family-owned concrete contractor for homeowners who want it done right beneath the surface: honest diagnosis, drainage-first prep, written estimates, and a job site left clean. Insured with general liability and workers' compensation. No foundation repair. Phone (225) 363-8576, Mon to Fri 8am to 6pm, Sat 9am to 1pm, Sun closed.

Watson recorded 31.39 inches of rain from the August 2016 storm, according to NOAA, so a concrete contractor Watson property owners hire should think about water before anything else. Hernandez Concrete Works pours equipment pads for generators, HVAC units and pool equipment, and slabs for outbuildings, set so the things on them stay out of standing water.

## Watson and Live Oak, around Range Road and Springfield Road

Watson is an unincorporated community in Livingston Parish, also known locally as Live Oak. It grew up around the intersection of Range Road (LA 16) and Springfield Road (LA 1019), and LA 16 leads about 6 miles south to Denham Springs. Live Oak Church sits at the main intersection, Live Oak Hardware is a local fixture, and the Live Oak schools, from the elementary schools to Live Oak High, founded in 1895, carry the community's other name.

The 2020 Census counted 956 people in the Watson Census place. Watson's 70786 ZIP code is for post office boxes only, so most homes use a Denham Springs 70706 mailing address. The ACS (2020 to 2024) puts the median home's year built at 1995 and owner-occupancy at about 94 percent, the highest of any place we serve. Our base in St. George (70817) is about 17.6 driving miles away.

## Equipment pads from a concrete contractor in Watson, LA

A standby generator, an outdoor HVAC unit or a pool pump and filter all need a flat, solid place to sit that will not settle, tilt or flood. A concrete equipment pad does that job. The pad should be sized for the unit and its service clearances, sit above the surrounding grade, and shed water away from the equipment and the house. After a storm like 2016, the last place a generator should sit is in a puddle.

Check the equipment maker's installation instructions before we pour, since they often set the pad size and clearances. Then give the concrete a full day before walking on it and 5 to 7 days before the unit is set.

## Driveways on Range Road, Springfield Road and parish roads

Range Road (LA 16) and Springfield Road (LA 1019) are state highways, so a new driveway that connects to either one needs an Access Connection Permit from the Louisiana Department of Transportation and Development. On a parish road, the culvert under your driveway is part of the ditch system. Livingston Parish Public Works maintains more than 1,666 miles of roadside ditches and installs driveway culverts for residents, who buy the culvert themselves.

Call Public Works at 225-686-3030 before the forms go in. With the culvert set first, the driveway can be poured to meet it at the right height and the ditch keeps flowing. Before you settle the height of a pad or slab, check your lot on FEMA's Flood Map Service Center, which the parish permit office links from its permits page.

## Slabs for outbuildings, and Livingston Parish permits

If your Watson property has room for a barn, a workshop or a storage building, the slab under it follows the same rules: a prepared base, forms set to the building's footprint, and a floor set above the yard with ground sloping away from it. We pour the slab; the building comes from the supplier or builder you choose.

Watson is unincorporated, so permits come from Livingston Parish, which adopted building codes in 2001. The parish Permit Department issues permits for renovations and new residential construction, its inspection sequence under the 2021 IBC and IRC includes a Foundation inspection, and the inspections line is 225-686-3021. Permits can be filed online through MGO Connect. If a new drive to the building crosses a roadside ditch, parish Public Works offers driveway culvert installation, with residents buying their own culvert (225-686-3030, 28325 Charlie Watts Road).

If you need a pad for a generator or a slab for a barn, call a Watson concrete contractor you can reach with one phone call. Call (225) 363-8576 or send the estimate form, and Gerardo will walk your Watson property and put a written estimate in your hands.

## Services

- [Equipment Pads Baton Rouge: Generator, HVAC and Pool Pads](https://hernandezconcreteworks.com/concrete-construction/equipment-pads.md)
- [Concrete Slab Foundation and Slab Pours in Baton Rouge](https://hernandezconcreteworks.com/concrete-construction/concrete-slab.md)
- [Baton Rouge Pole Barns: Concrete Foundations and Floors](https://hernandezconcreteworks.com/concrete-construction/concrete-pole-barn-foundations.md)

## Local resources

- Livingston Parish Government: https://www.livingstonparishla.gov/
- Livingston Parish permits: https://www.livingstonparishla.gov/permits
- Livingston Parish online permits (MGO Connect): https://mgoconnect.org/cp?JID=189
- Livingston Parish Public Works (driveway culverts): https://www.livingstonparishla.gov/publicworks
- LaDOTD residential access connection permit (LA 16, LA 1019): https://dotd.la.gov/media/on2onpjs/1-access-connection-permit-residential-and-non-commercial-agriculture.pdf
- FEMA Flood Map Service Center: https://msc.fema.gov/portal/home

## Frequently asked questions

### How much rain did Watson get in August 2016?

NOAA Climate.gov reported that Watson received 31.39 inches of rain from the August 2016 storm, one of the highest totals recorded. The Amite River Basin Commission puts flood damage at 74 percent of Livingston Parish's housing stock. That is why we set every Watson pad and slab above the surrounding ground with the water planned first.

### Who issues permits for a slab or outbuilding in Watson?

Livingston Parish, because Watson is unincorporated. The parish Permit Department issues permits for renovations and new residential construction, and its inspection sequence includes a Foundation inspection under the 2021 IBC and IRC. Permits can be filed through MGO Connect, and inspections can be reached at 225-686-3021. Check before the pour, not after.

### My address says Denham Springs. Do you still serve me?

Yes. Watson's own 70786 ZIP code is for post office boxes, so most Watson homes use a Denham Springs 70706 address. We serve both Watson and Denham Springs, and our base in St. George (70817) is about 17.6 driving miles from Watson. Gerardo comes out to walk the site himself before writing your estimate.

### How big should a generator pad be?

Big enough for the unit plus the clearances its maker requires, which are listed in the installation instructions. Have those on hand when Gerardo visits, along with where you want the unit to sit. He will look at the ground, the drainage and the distance to the house, then size and place the pad so it stays level and out of standing water.

## Contact

- Hernandez Concrete Works, Baton Rouge, LA 70817
- Phone: (225) 363-8576
- Hours: Mon to Fri 8am to 6pm, Sat 9am to 1pm, Sun closed
- Free written estimate: https://hernandezconcreteworks.com/contact-us
