Concrete slabs
A New Concrete Slab Foundation, Built From the Dirt Up
Hernandez Concrete Works pours new concrete slab foundations and slabs on grade across the Baton Rouge area; we do not repair foundations. If your house has a cracked or settling foundation, you need a foundation repair specialist, and we will tell you that on the phone. If you need a new concrete slab in Baton Rouge for a shop, a garage, a shed, a metal building or a pole barn, that is the work we do, and the part that decides how long it lasts is the part nobody sees once it is poured.
Mon to Fri 8am to 6pm, Sat 9am to 1pm, Sun closed
01
New concrete slab foundation work, not foundation repair
Search for a concrete slab foundation in Baton Rouge and most of what comes up is foundation repair: piers, lifting, leveling. That is a different trade with different equipment. We don't do it, and we would rather say so up front than take a job we shouldn't.
When a call comes in about a house foundation that is cracking or sinking, Gerardo points the homeowner to a foundation specialist. When the call is about a new slab, whether that is the floor of a detached shop or the base under a steel building kit, we walk the site and write it up.
02
Why the base matters more than the concrete on top
Bad concrete can look perfect the day it's poured. A fresh slab on a poorly prepared base will be flat, smooth and broom-finished, and nobody can tell anything is wrong until the ground under it moves. That is why a slab on grade is mostly a dirt job before it is a concrete job.
Federal soil data backs up what anyone who digs here already knows. USDA soil survey data flags shrink-swell as a limitation for slab homes on roughly 4 in 10 acres in both East Baton Rouge and Livingston parishes. Soils like that swell when wet and shrink when dry, and a slab that sits on them unevenly will crack where the support changes.
So the base gets the attention: organic material and soft spots come out, fill goes in where it is needed, and the subgrade is compacted so the slab bears evenly across its whole footprint. None of that shows in the finished slab, which is exactly why it is the first thing to ask any contractor about.
03
Slope, drainage and where the water goes
Louisiana averages about 60 inches of rain a year. Every slab we pour is set so water runs off it and away from whatever sits next to it, not toward a house, not into a low corner of the yard and not back under the slab edge.
The Hernandez name has been on Baton Rouge area properties since 2013 through Hernandez Lawnscape, our sister company, and a lot of that work was drainage. That habit carries over. We look at where the water goes before the forms go up, because a slab that holds a puddle against a wall or sends runoff onto a neighbor's lot is a slab that was set wrong, even if it looks fine on day one.
Poor slope is one of the hidden failures Gerardo sees most. The job looks good when it's finished, and then the first hard rain shows the water sitting or running the wrong way.
04
Reinforcement and thickness follow the load
There is no single right answer for how thick a slab should be or how much steel goes in it. A slab for a small storage shed carries very different weight than a shop floor that will hold a truck, a lift or heavy equipment. Reinforcement such as rebar is there to hold concrete together when it cracks and to help it carry concentrated loads, and the right amount depends on what the slab will hold.
When a building supplier, an engineer or your permit plans call for a specific thickness, edge detail or steel layout, we pour to those plans. When it is a simple slab with no plans, we size it to what will sit on it and explain why, in writing, on the estimate.
Control joints are planned too. Concrete shrinks as it cures and will crack somewhere; joints give it a straight line to crack along instead of a random one across the middle.
05
Concrete slab installation in Baton Rouge: cure times and first use
Concrete keeps gaining strength for weeks after it is poured, and how it is treated in the first days matters. Our general guidance is simple: wait a full day, 24 hours, before walking on a new slab, and 5 to 7 days before driving on it or putting anything heavy on it.
If a building is going up on the slab, plan the delivery and the erection crew around that window. Your building supplier or erector may also have their own timing, and it is worth asking them before you book the date.
06
What a new slab on grade usually carries
Most of the slabs people call us about sit under something: a detached garage, a workshop, a storage shed, a steel building kit or the floor of a pole barn on a few acres. Each one asks something different of the concrete. A shed slab needs to be flat and dry. A shop floor needs to take point loads from jacks, lifts and rolling tool chests. A building slab has to match the anchor layout on the supplier's drawings.
That is why the first question Gerardo asks is not how big, but what is going on it and how it will be used ten years from now. People add a second vehicle, a heavier mower or a camper. A slab sized only for today tends to get outgrown, and pouring an addition later is always harder than pouring it right once.
07
What drives the cost to pour a concrete slab
We don't publish prices because no two slabs are the same, and a number on a website would be wrong for most of them. What we can tell you is what moves the price, so you can compare bids on equal terms.
- Size and thickness: more area and more depth mean more concrete and more labor.
- Site prep: clearing, removing old concrete, bringing in fill and compacting it.
- Access: whether the truck can reach the forms or the concrete has to be moved further.
- Reinforcement and edge details called for by the load or the plans.
- Drainage work around the slab so water leaves the site.
- Cleanup and haul-off, which should be in every bid and often is not.
08
How to judge concrete slab contractors, including us
Most homeowners collect two or three quotes, and they should. When one bid comes in well under the others, the savings usually come from somewhere: overhead, labor and profit, a little of everything, and sometimes the prep you can't see. Ask every contractor how they prepare and compact the base, how they set the slope, and what the price includes for cleanup.
Check the credentials too. Louisiana's Licensing Board for Contractors lists the registration and license thresholds for residential work, and the East Baton Rouge permits page says residential work over $7,500 must be done by a registered home improvement contractor or a contractor holding a residential license. We are insured, with general liability and workers' compensation, and you can ask us for proof the same as anyone.
Gerardo walks the property himself and puts a written estimate in your hands. A job is finished when the forms are pulled, the excess concrete and debris are hauled off and the property looks better than when we arrived.
If you need a new concrete slab foundation for a shop, garage, shed or steel building, call (225) 363-8576. Gerardo will walk the site, tell you plainly what the ground needs and put a written estimate in your hands. Our name is on every pour. Building something specific? See shed foundations and pole barn foundations.
How the job runs
From the walk‑through to a clean site.
Every job starts with Gerardo on the property and ends when the forms are pulled, the debris is hauled off and the site looks better than it did before the crew arrived.
01
Site walk
Gerardo looks at the ground, the drainage and what the slab will carry, and asks for any plans you have.
02
Written estimate
You get the scope in writing: size, prep, reinforcement, drainage and cleanup.
03
Base and forms
We clear, fill and compact the subgrade, then set forms to the slope the water needs.
04
Pour and finish
Steel goes in where the load calls for it, the slab is poured, jointed and broom-finished.
05
Cure and cleanup
Forms come off, debris is hauled away, and you get the cure timeline before anything heavy goes on it.
Straight answers
Questions about concrete slabs
Do you repair slab foundations?
No. We pour new concrete slabs and slab foundations; we do not repair, lift or level existing foundations. If your home's foundation is cracking or settling, call a foundation repair specialist. If you are adding a new slab for a shop, garage, shed, metal building or pole barn, that is our work, and Gerardo can walk the site and give you a written estimate.
How long before I can use a new concrete slab?
Wait a full day, 24 hours, before walking on it, and 5 to 7 days before driving on it or setting anything heavy on it. Concrete keeps getting stronger for weeks, so the first week is the window to be careful. If a building or heavy equipment is going on the slab, plan the delivery date around that timeline and check with your supplier.
How much does it cost to pour a concrete slab?
It depends on the size, thickness, site prep, reinforcement, access for the truck and any drainage work, so we price each slab after seeing the site. Gerardo can sometimes give a rough range on the phone, but the real number comes in a written estimate after he walks the property. Compare bids line by line, especially prep and cleanup.
What is a slab on grade?
A slab on grade is a concrete slab poured directly on prepared ground rather than raised on piers or a crawlspace. It is the common choice for shops, garages, sheds and many metal buildings. Because it bears directly on the soil, the base preparation and compaction under it decide how well it holds up over time.
Do I need a permit for a new concrete slab?
It depends on what the slab is for and where you live. East Baton Rouge Parish lists any accessory structure over 200 square feet among residential work that needs a permit, and the City of St. George and Livingston Parish run their own permit offices. Check with your local permit office before the pour, and ask any contractor how they handle it.
Will my new slab crack?
Most concrete develops some cracks, because it shrinks as it cures. The goal is to control where and how it cracks. A well-compacted base, the right reinforcement for the load, proper slope and planned control joints keep cracks small and on straight lines instead of wandering across the slab or opening up as the ground moves.
What areas do you pour slabs in?
We work across East Baton Rouge Parish, including Baton Rouge, St. George, Inniswold, Shenandoah, Old Jefferson, Merrydale, Monticello, Brownfields, Baker, Central and White Hills, and in Livingston Parish in Denham Springs, Walker and Watson. We are based in the Shenandoah area, inside the City of St. George.
Keep reading
Related concrete work
Free written estimate
Tell us what is cracked, lifted or missing. We'll tell you straight.
Tell us what you are seeing with your concrete slabs. Gerardo walks the property himself and puts a free written estimate in your hands.
Gerardo Hernandez walks every property himself.
Request a free estimate (225) 363-8576Mon to Fri 8am to 6pm, Sat 9am to 1pm, Sun closed